Custom Metal Keychains with Logo Bulk
$1.66
Round stamped-metal keychains, produced for corporate gifting and trade-show distribution at 100 pcs per design. The photo sample shows the format at two diameters: bright silver-tone plated rim, punched hanging tab, and a glossy domed face carrying artwork in purple, white and pink. Your logo, event number or monochrome lockup swaps into the same face zone; choose laser engraving for permanence, UV print under the dome for full colour, or soft-enamel fill for raised outlines that read by thumb. Split ring, jump-linked ring or swivel hook hardware, with reverse laser data available per batch. Samples in 3-5 days, production 7-15 days after artwork approval, capacity of 1,000,000 pcs per month across our gift lines, and FBA labelling handled before dispatch. A free digital mock-up returns the same working day your file lands.
Custom Metal Keychains with Logo Bulk: the Round We Strike Most
Keys travel every day, so a metal round on that ring stays visible long after a banner, a tote or a printed pen has been filed away. When procurement teams search for custom metal keychains with logo bulk production, this pendant format is the piece we quote most often, and for a simple arithmetic reason: one striking die serves the whole allocation. Our minimum is 100 pcs per design, which spreads tooling cost across a booth run, a dealer-network pack or an onboarding set instead of charging it against a handful of test units.
Every stage, from die to polybag, happens under our own roof, with capacity of 1,000,000 pcs per month across our gift lines. That in-house stack is why a 3,000-piece spring order and a 9,000-piece autumn re-run keep the same artwork, the same die and the same plating recipe without a fresh setup conversation.
Reading the Production Sample
The studio shot carries two rounds from one artwork at two diameters, so you can check construction details before your drawing goes to the tool room:
- Stamped metal body with a bright silver-tone plated rim and a hanging tab punched as part of the blank.
- Glossy domed front face, purple outer field, white heart ring, pink centre, with a poured clear layer above the colour work.
- Both units hang from a split ring; the larger adds a jump link between tab and ring, the smaller takes the ring straight through the tab.
- No pry edge, no church-key slot, no corkscrew anywhere on this mould, so plan it as pure pendant hardware.
Send your own vector mark, event number or monochrome lockup and it drops into the identical face zone. We work diameters from 1 to 3 inches per design; the photo prints no dimension, so exact millimetre figures come back with your quote rather than a guess here.
Engraving, Printing or Enamel Fill: Matching Method to Artwork
Three decoration routes, costed differently, and the file decides which one fits. Laser engraving burns the mark into bare metal: permanent, no colour, and the practical choice when dealer names, years or serial codes go on the reverse. Full-colour UV printing covers the face with your artwork, then the poured dome seals the print under a curved glossy layer. Soft-enamel fill pushes paint into recessed cells cut by the strike, which suits two- or three-tone lockups where a thumb should feel the outline. Upload the logo with your inquiry and our engineers pick the route that holds your colour at the 100-piece price tier, then show it on the mock-up.
Plating Batch and Colour Position
Finish is a batch decision, not a catalogue toggle. Polished nickel, antique brass, black nickel and gold-tone all ride the same line, but the metal tone tints how enamel reads, so Pantone targets get matched per plating load. For brand-critical corporate work, ask for a pre-production unit pulled from your real bath before the line fills; it sits inside the normal sample step rather than being billed as a special service.
Hardware That Survives Pocket Wear
A split ring is the cheap, familiar option, and everyone knows how to load keys onto it, but its coil fatigues after a few hundred changes and the ring sags. A swivel snap hook keeps working longer, clips onto bags and lanyards instead of bare keys, and reads as more considered equipment at executive events. We mix hardware inside a single order when your distribution plan splits audiences, and the ring decision is yours at mock-up stage, not locked at tooling.
What You Can Specify on This Item
- Face artwork: logo, print, enamel or domed photo, single side or double side.
- Diameter and body thickness anywhere in the 1-3 inch programme range.
- Plating tone from our standard baths, matched per batch.
- Attachment: split ring direct, jump-linked split ring, or swivel snap hook.
- Reverse personalisation: engraved dealer code, campaign year or clean blank for later laser data.
- Packing: polybag, header card, gift box, with FBA labelling on request.
Reference Specification for the Round Pendant Format
| Struck blank | Zinc-alloy or steel body chosen against artwork depth; crisp thin-line faces get the harder alloy |
|---|---|
| Front finish | UV print sealed under a poured dome, or soft enamel pushed into struck recesses |
| Rim and tab | Plated edge carries the punched hanging loop; all hardware attaches there |
| Size programme | 1 to 3 inches per design; the photo round is planned at two diameters off one tool family |
| Ring choices | Split ring direct to tab, split ring over a jump link, or swivel hook substitution |
| Reverse zone | Open for laser text on request; leave it bare if the artwork wraps to both sides |
| Minimum order | 100 pcs per design |
| Sample window | 3-5 days |
| Run window | 7-15 days after artwork approval |
Pricing builds from your file, size and quantity band. The 100-piece tier acts as your reference floor; every volume step comes back with the digital proof instead of a sticker here.
From File to Carton: Sampling and Timing
Send AI, EPS, PDF or a clean high-resolution PNG. A free digital mock-up returns the same working day, and once the drawing is signed off, physical samples take 3-5 days. Production then occupies 7-15 days after artwork approval. Working backwards from a show date is the discipline that keeps programmes alive: reserve two buffer weeks for the freight tail you actually control, sea freight for pallets, air or DHL, UPS, FedEx, TNT parcels when a carton must reach a booth by a hard deadline.
Packing and Shipping
Standard export packing folds each keychain into its own OPP polybag, stacks inner boxes, then closes master cartons rated for ocean transit. If your distribution needs pre-sorted mixes, several artwork designs can share one outer carton at the ratio you dictate. For Amazon sellers, FBA labelling and carton requirements are handled before dispatch. Freight is quoted against your delivery address, by sea, air or express courier.
Buying Questions Before You Send Artwork
Can one order carry several dealer logos?
Do you store the striking die between reorders?
How close will the plated tone sit to our brand colour?
Does the domed face hold up at outdoor events?
What if our conference date moves earlier?
Related Lines Worth a Second Look
If a different format suits the audience better, our sister pages cover the rest of the programme: engraved keepsake rounds built for hospitality buyers at custom keychains with your logo, stitched hide tags for quiet brand-affinity gifting via custom leather keychains, moulded-colour volume charms through custom PVC keychains, and counter-ready printed slabs in custom acrylic keychains. Browse the wider metal crafts catalogue or filter straight to keychain lines.
Ready to price your run? Send the logo file and quantity band through our request quote page, or drop us a line at [email protected] / +86-15967739086. A free digital mock-up returns the same working day.
